Raspberry PI & Motion Sensor
Raspberry PI & Motion Sensor
Embedded Files
Designed and implemented a real-time data collection and visualization system using a Raspberry Pi and a motion sensor. Used Python to create a program that collected the data from the sensor and stored it in a text file that I used with the visualization tool Tableau
Designed and implemented a real-time data collection and visualization system using a Raspberry Pi and a motion sensor. Used Python to create a program that collected the data from the sensor and stored it in a text file that I used with the visualization tool Tableau
20220430_171309.mp4
Here are more images from my project.
Here are more images from my project.
Sequence #1(1).mp4
Black cable is the power on pin #2. White cable is the ground on pin #6. Orange cable is data to pin #7 (GPIO 4)
Left pin on sensor is the power pin, Black cable. Middle pin is the data pin, Orange cable. Right pin is the ground pin, White cable.
Data visualization on Tableau.
Before I began the project, I had to ensure that Raspbian was installed on the Pi, I did this by downloading the New Out of the Box Software and following the installation prompts through that. While in the system, I went ahead an wrote a Python program to capture the data from the sensor into a new csv file. I then proceeded to the hands on portion of this project by connecting the sensor to the Raspberry Pi using a couple of jumper wires. Once connected, I ran the python program to ensure that the code ran correctly and the sensor was capturing motion. I let it run for a few hours to capture data which I visualized using Tableau.
Page updated
Google Sites
Report abuse